Lobe pump PLP
| Max. viscosity | <1.000.000 cP |
| Capacity | < 110 m³/h |
| Pressure | < 15 bar, on request up to 25 bar |
| Wetted parts | 1.4404 |
| Material shafts | 1.4462 duplex steel |
| Material gearbox casing | 1.4301 |
| Connection sizes | 3/4″ / DN20 to 4″ / DN100 |
| Connections | Couplings: DIN11851, DIN11864-1, SMS1145Flanges: EN1092-1, Rectangular, DIN11864-2, ANSI
Tri-Clamps: ISO2852, DIN32676, DIN11864-3 |
| Shaft sealing | Single mech. seal SIC/SIC or TC/TC Double mech. seal SIC/SIC or TC/TC WDR Lipseal Singl O-ring Double O-ring with quench |
| Elastomers | EPDM, Viton, NBR, Teflon, KALREZ, etc. according to FDA |
| Surface rougness | Standard < 0,8 Ra, optional < 0,5 Ra |
| Motor | Standard: IEC, IE3, B3, IP55, isolcl. F, PTC Optional: IE4, ATEX, CSA/UL, Decentralised variable speed drive |
